#include <windows.h>
#include <stdio.h>
#include <time.h>
 
#define CELL 20
#define ROWS 25
#define COLS 15
//升級所需分數值
#define SCORE_LEVEL_INC 80
#define ID_TIMER 1
 
/////////////////全局變量/////////////////////////////
HWND hwnd;                  //保存窗口句柄
 
int score=0;                //分數
int level=0;                //級數
int interval_unit=25;       //隨級數遞增的時間間隔增量
int interval_base=300;      //時間間隔基量
int old_interval;           //保存當前的時間間隔，用于加速操作
 
int cur_left,cur_top;       //記錄方塊當前的位置
int width_block,height_block;   //方塊的寬帶和高度
 
bool isPause=false;             //暫停標識
UINT timer_id=0;                //保存計時器ID
 
static byte *block=NULL;        //方塊，方塊為隨機大小，采用動態分配內存方式，所以這里是指針變量
byte g_panel[ROWS][COLS]={0};
////////////////////////////////////////////////////
LRESULT CALLBACK WndProc ( HWND,UINT,WPARAM,LPARAM );
void DrawPanel ( HDC hdc );     //繪制表格
void RefreshPanel ( HDC hdc );      //刷新面板
void DoDownShift ( HDC hdc );       //下移
void DoLeftShift ( HDC hdc );       //左移
void DoRightShift ( HDC hdc );      //右移
void DoAccelerate ( HDC hdc );      //加速
void DoRedirection ( HDC hdc ); //改變方向
void ClearRow ( HDC hdc );          //消行
bool ExportBlock();     //輸出方塊，
//該函數會直接修改全局變量block,width_block,height_block,
//cur_left和cur_top
bool IsTouchBottom ( HDC hdc );         //判斷是否到達底部
 
int main()
{
    HINSTANCE hInstance=GetModuleHandle ( NULL );
    TCHAR szAppName[]=TEXT ( "teris" );
    MSG msg;
    WNDCLASS wc;
 
    wc.style=CS_HREDRAW|CS_VREDRAW;
    wc.lpfnWndProc=WndProc;
    wc.cbClsExtra=0;
    wc.cbWndExtra=0;
    wc.hInstance=hInstance;
    wc.hIcon=LoadIcon ( NULL,IDI_APPLICATION );
    wc.hCursor=LoadCursor ( NULL,IDC_ARROW );
    wc.hbrBackground= ( HBRUSH ) GetStockObject ( WHITE_BRUSH );
    wc.lpszMenuName=NULL;
    wc.lpszClassName=szAppName;
    if ( !RegisterClass ( &wc ) )
    {
        printf ( "RegisterClass occur errors!" );
        return 0;
    }
    hwnd=CreateWindow ( szAppName,TEXT ( "Teris Demo" ),
                        WS_OVERLAPPEDWINDOW,
                        0,0,0,0,
                        NULL,
                        NULL,
                        hInstance,
                        NULL );
    ShowWindow ( hwnd,SW_SHOW );
    UpdateWindow ( hwnd );
    while ( GetMessage ( &msg,NULL,0,0 ) )
    {
        TranslateMessage ( &msg );
        DispatchMessage ( &msg );
    }
    return msg.wParam;
}
 
void DrawPanel ( HDC hdc )          //繪制游戲面板
{
    int x,y;
    RECT rect;
 
    for ( y=0; y<ROWS; y++ )
    {
        for ( x=0; x<COLS; x++ )
        {
            //計算方塊的邊框范圍
            rect.top=y*CELL+1;
            rect.bottom= ( y+1 ) *CELL-1;
            rect.left=x*CELL+1;
            rect.right= ( x+1 ) *CELL-1;
            FrameRect ( hdc,&rect, ( HBRUSH ) GetStockObject ( BLACK_BRUSH ) );
        }
    }
}
 
void DoDownShift ( HDC hdc )        //下移
{
    if ( NULL==block ) return;
 
    //判斷是否到達底部
    if ( IsTouchBottom ( hdc ) )    //到底部
    {
        //消行處理
        ClearRow ( hdc );
        ExportBlock();      //輸出下一個方塊
    }
 
    cur_top++;
    RefreshPanel ( hdc );
}
 
void DoLeftShift ( HDC hdc )        //左移
{
    int x,y;
    if ( NULL==block ) return;
 
    if ( 0==cur_left ) return;
    if ( cur_top<0 ) return; //方塊沒有完整顯示前，不能左移
    for ( y=0; y<height_block; y++ )
    {
        for ( x=0; x<width_block; x++ )          //從左邊開始掃描，獲取該行最左邊的實心方格塊
        {
            if ( * ( block+y*width_block+x ) )
            {
                //判斷當前方格在面板上面左邊一個方格是否為實心，是就代表不能再左移
                if ( g_panel[cur_top+y][cur_left+x-1] ) return;
 
                break;      //只判斷最左邊的一個實心方格，之后直接掃描下一行
            }
        }
    }
    cur_left--;
    RefreshPanel ( hdc );
}
 
void DoRightShift ( HDC hdc )       //右移
{
    int x,y;
    if ( NULL==block ) return;
 
    if ( COLS-width_block==cur_left ) return;
    if ( cur_top<0 ) return;     //方塊完整顯示前不能右移
    for ( y=0; y<height_block; y++ )
    {
        for ( x=width_block-1; x>=0; x-- )   //從右邊開始掃描，獲取該行最右邊的實心方格塊
        {
            if ( * ( block+y*width_block+x ) )
            {
                //判斷當前方格在面板上右邊一個方格是否為實心，是就代表不能再右移
                if ( g_panel[cur_top+y][cur_left+x+1] ) return;
 
                break;      //只判斷最右邊的一個實心方格
            }
        }
    }
    cur_left++;
    RefreshPanel ( hdc );
}
 
void DoRedirection ( HDC hdc )      //改變方向
{
    int i,j;
    byte * temp=NULL;
    if ( NULL==block ) return;
    if ( cur_top<0 ) return;     //方塊完整顯示前不能轉向
 
    temp= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
    for ( i=0; i<width_block; i++ )
    {
        for ( j=0; j<height_block; j++ )
        {
            //temp[i][j]=block[height_block-j-1][i];
            * ( temp+i*height_block+j ) =* ( block+ ( height_block-j-1 ) *width_block+i );
        }
    }
 
    //給方塊重新定位
    int incHeight=width_block-height_block;
    int incWidth=height_block-width_block;
    int temp_cur_top=cur_top-incHeight/2;
    int temp_cur_left=cur_left-incWidth/2;
 
    //system("cls");
    //printf("temp_top=%d, temp_left=%d",temp_cur_top,temp_cur_left);
 
    //判斷當前空間是否足夠讓方塊改變方向
    int max_len=max ( width_block,height_block );
    //防止下標訪問越界
    if ( temp_cur_top+max_len-1>=ROWS||temp_cur_left<0||temp_cur_left+max_len-1>=COLS )
    {
        free ( temp );      //退出前必須先釋放內存
        return;
    }
    for ( i=0; i<max_len; i++ )
    {
        for ( j=0; j<max_len; j++ )
        {
            //轉向所需的空間內有已被占用的實心方格存在，即轉向失敗
            if ( g_panel[temp_cur_top+i][temp_cur_left+j] )
            {
                free ( temp );      //退出前必須先釋放內存
                return;
            }
        }
    }
 
    //把臨時變量的值賦給block，只能賦值，而不能賦指針值
    for ( i=0; i<height_block; i++ )
    {
        for ( j=0; j<width_block; j++ )
        {
            //block[i][j]=temp[i][j];
            * ( block+i*width_block+j ) =* ( temp+i*width_block+j );
        }
    }
 
    //全局變量重新被賦值
    cur_top=temp_cur_top;
    cur_left=temp_cur_left;
    //交換
    i=width_block;
    width_block=height_block;
    height_block=i;
 
    free ( temp );      //釋放為臨時變量分配的內存
    RefreshPanel ( hdc );
}
 
void DoAccelerate ( HDC hdc )       //加速
{
    if ( NULL==block ) return;
 
    if ( IsTouchBottom ( hdc ) )
    {
        //消行處理
        ClearRow ( hdc );
        ExportBlock();
    }
    cur_top++;
    RefreshPanel ( hdc );
}
 
bool IsTouchBottom ( HDC hdc )
{
    int x,y;
    int i,j;
 
    if ( NULL==block ) return false;
    if ( ROWS==cur_top+height_block )
    {
        //固定方塊
        for ( i=0; i<height_block; i++ )
        {
            for ( j=0; j<width_block; j++ )
            {
                if ( * ( block+i*width_block+j ) ) g_panel[cur_top+i][cur_left+j]=1;
            }
        }
        return true;
    }
    for ( y=height_block-1; y>=0; y-- )          //從底行開始掃描
    {
        //判斷第一個實心方塊在面板上鄰接的下方方格是否為實心，是就代表已經到達底部
        for ( x=0; x<width_block; x++ )
        {
            if ( * ( block+y*width_block+x ) )
            {
                if ( cur_top+y+1<0 ) return false;
                if ( g_panel[cur_top+y+1][cur_left+x] )
                {
                    //判斷是否gameover
                    if ( cur_top<=0 )
                    {
                        if ( timer_id )
                        {
                            KillTimer ( hwnd,ID_TIMER );
                            timer_id=0;
                        }
                        MessageBox ( hwnd,TEXT ( "游戲結束" ),TEXT ( "MSG" ),MB_OK|MB_ICONEXCLAMATION );
                        SendMessage ( hwnd,WM_CLOSE,0,0 );
                    }
                    //
                    //固定方塊
                    for ( i=0; i<height_block; i++ )
                    {
                        for ( j=0; j<width_block; j++ )
                        {
                            if ( * ( block+i*width_block+j ) ) g_panel[cur_top+i][cur_left+j]=1;
                        }
                    }
                    return true;
                }
            }
        }
    }
    return false;
}
 
void ClearRow ( HDC hdc )               //消行
{
    int i,j,k;
    int count=0;        //消行次數
    bool isFilled;
    //消行處理
    for ( i=ROWS-1; i>=0; i-- )
    {
        isFilled=true;
        for ( j=0; j<COLS; j++ )
        {
            if ( !g_panel[i][j] )
            {
                isFilled=false;
                break;
            }
        }
        if ( isFilled )
        {
            for ( j=0; j<COLS; j++ )
            {
                g_panel[i][j]=0;
            }
            //所有方塊往下移
            for ( k=i-1; k>=0; k-- )
            {
                for ( j=0; j<COLS; j++ )
                {
                    g_panel[k+1][j]=g_panel[k][j];
                }
            }
            i=i+1;
            count++;
        }
    }
 
    //最高級別為9級，所以分數極限為(9+1)*SCORE_LEVEL_INC-1
    if ( score>=10*SCORE_LEVEL_INC-1 ) return;
 
    //加分規則：消除行數，1行加10分，2行加15分,3行加20分,4行加30分
    switch ( count )
    {
    case 1:
        score+=10;
        break;
    case 2:
        score+=15;
        break;
    case 3:
        score+=20;
        break;
    case 4:
        score+=30;
        break;
    }
 
    int temp_level=score/SCORE_LEVEL_INC;
    if ( temp_level>level )
    {
        level=temp_level;
        //撤銷當前計時器，然后重設
        if ( timer_id ) KillTimer ( hwnd,ID_TIMER );
        timer_id=SetTimer ( hwnd,ID_TIMER,interval_base-level*interval_unit,NULL );
    }
 
    system ( "cls" );
    printf ( "score: %d, level: %d ",score,level );
}
 
void RefreshPanel ( HDC hdc )           //刷新面板
{
    int x,y;
    RECT rect;
    HBRUSH h_bSolid= ( HBRUSH ) GetStockObject ( GRAY_BRUSH ),
                     h_bEmpty= ( HBRUSH ) GetStockObject ( WHITE_BRUSH );
    if ( NULL==block ) return;
 
    //先刷屏
    for ( y=0; y<ROWS; y++ )
    {
        for ( x=0; x<COLS; x++ )
        {
            //為避免刷掉方塊的邊框，rect范圍必須比邊框范圍小1
            rect.top=y*CELL+2;
            rect.bottom= ( y+1 ) *CELL-2;
            rect.left=x*CELL+2;
            rect.right= ( x+1 ) *CELL-2;
            if ( g_panel[y][x] )
                FillRect ( hdc,&rect,h_bSolid );
            else
                FillRect ( hdc,&rect,h_bEmpty );
        }
    }
    //再定位方塊
    for ( y=0; y<height_block; y++ )
    {
        for ( x=0; x<width_block; x++ )
        {
            if ( * ( block+y*width_block+x ) )          //實心
            {
                rect.top= ( y+cur_top ) *CELL+2;
                rect.bottom= ( y+cur_top+1 ) *CELL-2;
                rect.left= ( x+cur_left ) *CELL+2;
                rect.right= ( x+cur_left+1 ) *CELL-2;
                FillRect ( hdc,&rect,h_bSolid );
            }
        }
    }
}
 
bool ExportBlock()          //輸出方塊
{
    int sel;
    if ( block )
    {
        free ( block );     //釋放之前分配的內存
        block=NULL;
    }
 
    sel=rand() %7;
    switch ( sel )
    {
    case 0:     //水平條
        width_block=4;
        height_block=1;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =1;       //可以理解為*(block+0*width_block+0)=1，即第一行的第一個方格，下面同理
        * ( block+1 ) =1;       //*(block+0*width_block+1)=1
        * ( block+2 ) =1;       //*(block+0*width_block+2)=1
        * ( block+3 ) =1;       //*(block+0*width_block+3)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 1:     //三角
        width_block=3;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =0;       //可以理解為*(block+0*width_block+0)=0，即第一行的第一個方格，下面同理
        * ( block+1 ) =1;       //*(block+0*width_block+1)=1
        * ( block+2 ) =0;       //*(block+0*width_block+2)=0
        * ( block+3 ) =1;       //*(block+1*width_block+0)=1，第二行開始
        * ( block+4 ) =1;       //*(block+1*width_block+1)=1
        * ( block+5 ) =1;       //*(block+1*width_block+2)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 2:     //左橫折
        width_block=3;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =1;       //可以理解為*(block+0*width_block+0)=1，下面同理
        * ( block+1 ) =0;       //*(block+0*width_block+1)=0
        * ( block+2 ) =0;       //*(block+0*width_block+2)=0
        * ( block+3 ) =1;       //*(block+1*width_block+0)=1
        * ( block+4 ) =1;       //*(block+1*width_block+1)=1
        * ( block+5 ) =1;       //*(block+1*width_block+2)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 3:     //右橫折
        width_block=3;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =0;       //可以理解為*(block+0*width_block+0)=0，下面同理
        * ( block+1 ) =0;       //*(block+0*width_block+1)=0
        * ( block+2 ) =1;       //*(block+0*width_block+2)=1
        * ( block+3 ) =1;       //*(block+1*width_block+0)=1
        * ( block+4 ) =1;       //*(block+1*width_block+1)=1
        * ( block+5 ) =1;       //*(block+1*width_block+2)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 4:     //左閃電
        width_block=3;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =1;       //可以理解為*(block+0*width_block+0)=1，下面同理
        * ( block+1 ) =1;       //*(block+0*width_block+1)=1
        * ( block+2 ) =0;       //*(block+0*width_block+2)=0
        * ( block+3 ) =0;       //*(block+1*width_block+0)=0
        * ( block+4 ) =1;       //*(block+1*width_block+1)=1
        * ( block+5 ) =1;       //*(block+1*width_block+2)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 5:     //右閃電
        width_block=3;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =0;       //可以理解為*(block+0*width_block+0)=0，下面同理
        * ( block+1 ) =1;       //*(block+0*width_block+1)=1
        * ( block+2 ) =1;       //*(block+0*width_block+2)=1
        * ( block+3 ) =1;       //*(block+1*width_block+0)=1
        * ( block+4 ) =1;       //*(block+1*width_block+1)=1
        * ( block+5 ) =0;       //*(block+1*width_block+2)=0
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    case 6:     //石頭
        width_block=2;
        height_block=2;
        block= ( byte * ) malloc ( sizeof ( byte ) *width_block*height_block );
        * ( block+0 ) =1;       //可以理解為*(block+0*width_block+0)=1，下面同理
        * ( block+1 ) =1;       //*(block+0*width_block+1)=1
        * ( block+2 ) =1;       //*(block+1*width_block+0)=1
        * ( block+3 ) =1;       //*(block+1*width_block+1)=1
 
        cur_top=0-height_block;
        cur_left= ( COLS-width_block ) /2;
        break;
    }
    return block!=NULL;
}
 
LRESULT CALLBACK WndProc ( HWND hwnd,UINT message,WPARAM wParam,LPARAM lParam )
{
    HDC hdc;
    PAINTSTRUCT ps;
    //TCHAR szBuffer[1024];
 
    switch ( message )
    {
    case WM_CREATE:
        MoveWindow ( hwnd,400,10,CELL*COLS+8,CELL*ROWS+32,FALSE );      //補齊寬度和高度
        srand ( time ( NULL ) );
        ExportBlock();
 
        timer_id=SetTimer ( hwnd,ID_TIMER,interval_base-level*interval_unit,NULL );
        return 0;
    case WM_TIMER:
        hdc=GetDC ( hwnd );
        DoDownShift ( hdc );
        ReleaseDC ( hwnd,hdc );
        return 0;
    case WM_KEYDOWN:
        hdc=GetDC ( hwnd );
        switch ( wParam )
        {
        case VK_LEFT:                           //左移
            if ( !isPause ) DoLeftShift ( hdc );
            break;
        case VK_RIGHT:                          //右移
            if ( !isPause ) DoRightShift ( hdc );
            break;
        case VK_UP:                             //轉向
            if ( !isPause ) DoRedirection ( hdc );
            break;
        case VK_DOWN:                           //加速
            if ( !isPause ) DoAccelerate ( hdc );
            break;
        case VK_SPACE:      //暫停
            isPause=!isPause;
            if ( isPause )
            {
                if ( timer_id ) KillTimer ( hwnd,ID_TIMER );
                timer_id=0;
            }
            else
            {
                timer_id=SetTimer ( hwnd,ID_TIMER,interval_base-level*interval_unit,FALSE );
            }
            break;
        }
        ReleaseDC ( hwnd,hdc );
        return 0;
    case WM_PAINT:
        hdc=BeginPaint ( hwnd,&ps );
        DrawPanel ( hdc );          //繪制面板
        RefreshPanel ( hdc );       //刷新
        EndPaint ( hwnd,&ps );
        return 0;
    case WM_DESTROY:
        if ( block ) free ( block );
        if ( timer_id ) KillTimer ( hwnd,ID_TIMER );
        PostQuitMessage ( 0 );
        return 0;
    }
    return DefWindowProc ( hwnd,message,wParam,lParam );
}

標簽： idc isp

版權申明：本站文章部分自網絡，如有侵權，請聯系：west999com@outlook.com
特別注意：本站所有轉載文章言論不代表本站觀點！
本站所提供的圖片等素材，版權歸原作者所有，如需使用，請與原作者聯系。